12-axis Camless Wire Rotary Spring Machine
- Model :US-236R / US-480R
- Wire Diameter :0.3-2.5mm/1.5-5.0mm
- Product use:The machine adopts the unique design of no CAM and no rocker, controlled independently by several groups of servo motors, and has strong expansibility.Can produce a variety of special-shaped spring, pressure spring, tension spring, double torsion spring, flat spring (spring spring) and a variety of line forming.In automation solutions, fusion is powerful!
using the unique camless and rockless arm design, the adjustment of the technical requirements are reduced, the adjustment time is greatly reduced, the adjustment speed is more than 50% faster than
1. using the unique camless and rockless arm design, the adjustment of the technical requirements are reduced, the adjustment time is greatly reduced, the adjustment speed is more than 50% faster than the traditional CAM machine, the production speed is fast, accurate positioning, stable operation, strong expansibility;
2. Japanese Sanyo motor, imported precision bearing parts , and imported guide rail to improve the motion accuracy, ensure stable operation, durability and effectively extend the service life of the machine;
3. Intelligent professional-level industrial computer operating system, multi-language display, easy to learn and operate operation interface , powerful functions to meet the requirements of complex multi-tasks.
4. operating system protection device, wire feeding frame broken alarm, safety door protection mechanism, to provide comprehensive protection for the operator and the machine;
|Wire Wheel Sets||2 Sets||3 Sets|
|Wire Feeding Axis||2.7KW||4.4KW|
|Rotary Wire Axis||2.0KW||2.7KW|
|Rotary Quill Axis||0.75KW||2.0KW|
1. Correct installation and placement
Machine place workshop, the need for sufficient grounding, manufacturers in the transport process, with the bottom of the board, the need to remove the board, pad on the rubber pad, the purpose of this is to prevent wire forming machine production process, not due to the machine operation caused by shaking.
2.Add oil and butter regularly
The location of refueling is mainly crimp, wire box, and transmission gear and other places, long - term maintenance of wire forming machine part of the run-in place of oil lubrication, generally a week to check the butter.
3. Keep the machine clean
Before leaving work every day, employees need to wipe the surface of wire forming machine clean, if long-term cleaning, oil accumulation, there will be the possibility of circuit parameters change, and the long-term erosion of dust, so that the machine surface aging, affecting the appearance.
4. Normal operation
Special attention should be paid to the production of products beyond the line diameter, so as not to reduce the accuracy of equipment.The machine should be placed in a ventilated and dry place to prevent moisture from rusting or damaging the circuit.Can achieve timely and careful maintenance of the machine, not only can maintain the accuracy and stability of wire forming machine, extend the service life, but also can reduce the machine repair rate.