Union Spring(Shenzhen) Technology Co., Ltd.

HOME > News > Company News

Special maintenance of wire bending machine

  The wire bending machine is used for a period of time. In addition to the correct operation method, maintenance is also required to ensure its service life. Mechanical maintenance is a common topic, and the correct maintenance also needs to be learned. So today we will take you to see the special maintenance of wire bending machines.

wire bending machine

  1. Running-in maintenance: New machines or machinery after overhaul must be run-in maintenance during the running-in period. When the machine is used during the specified run-in period, the load and speed must be increased step by step according to the corresponding regulations, and the lubrication and tightening conditions must be checked comprehensively, and the conditions of the whole machine must be observed. If any abnormalities are found, they must be resolved in time. The focus of running-in maintenance is to replace each part of the lubricant, lubricate each part, and tighten each bolt. Perform a secondary maintenance after the running-in period.

  2. Seasonal maintenance: The machinery should be maintained once a year before summer or winter. The focus is on the fuel-fuel system, hydraulic system, cooling system and starting system. The following work needs to be done according to the actual situation: replacing fuel oil and hydraulic oil, adjusting the relative density of battery electrolyte, taking cold or cooling measures, and cleaning the cooling system.

  3. Out of service maintenance: When the mechanical equipment needs to be out of service for a period of time due to seasonal factors (such as winter holiday), etc., it should be out of service for maintenance. Mainly do cleaning, plastic surgery, matching, anti-corrosion and other work.

  4. Storage and maintenance: The storage and maintenance should be carefully implemented in accordance with the requirements for storage to reduce the erosion of long-term storage equipment caused by natural weather.

   The above is related to the special maintenance of the wire bending machine, I hope it will be helpful to everyone.