Solution for cable jam of camless spring core rod
Due to the quality of the wire or the error in the operation process, it is easy to cause the cable jam of the camless spring core. If the core wire is blocked, the blocked spring wire will not be removed in time, which will affect the normal of the camless spring machine. Operation, then the cam spring-less core rod plugging solution, let ’s learn together below.
① First turn off the power switch of the camless spring machine, break the wire from the feed roller that enters at the back, and then remove the core rod from the control panel of the human body at the front end, and try to take out the tail of the core rod.
② If you can remove the tail clip, it means that the body of the core rod is blocked. At this time, you can clamp the wire with your pliers and try to pull the wire level from one side. You can also try to drip into the core rod. Certain liquid greases.
③If you cannot remove the tail clip, it means that the tail clip of the core rod is blocked. You can try to clamp the tail clip with pliers, and then pull out the tail clip vigorously. If it is a two-tailed tail clip, you can pull out the tail clip. If it is an overall tail clip, you must find a way to remove the wire blocked inside or replace a new tail clip, so that you can deal with the problem of plugging the core rod.
The above is the solution for the plugging of the camless spring core rod. The production and operation of the camless spring machine should try to avoid the plugging of the core rod. Otherwise, it will have a great impact on the production efficiency. For processing, if you can't handle it, you can contact the corresponding manufacturer for assistance. Union Spring(Shenzhen) Technology Co., Ltd. can provide customers with a variety of high-quality camless spring machine equipment and also provide customers with comprehensive after-sales maintenance guarantee.