Union Spring Main: Spring machine, Wire rotary spring machine, Wire bending machine

Union Spring(Shenzhen) Technology Co., Ltd.

Home > News > Company News

How to program a camless spring machine

The upgrading of mechanical equipment has further improved the spring machine, and has gradually changed from a mechanical type to a numerically controlled intelligent spring machine. As long as it is a CNC lathe, then it is necessary to perform a programming operation. Let's take a look at how to program a camless spring machine.

How to operate the function keys:

Emergency stop button:

In order to respond to the sudden situation of the spring machine in time, an emergency stop button is set on the panel. In any operating state, pressing the button will immediately stop the system and lock it. At this time, other keys cannot be used. If you want to release the lock, you can Turn clockwise. If you press the emergency stop during the process and then exit the emergency stop state, only the origin key, axis selection key, direction key and [F5] key can be used at this time. In this state, you need to perform the return to origin operation or press [ Press the RESET key to enter the normal operation mode.

Speed control knob:

The speed measurement control knob is a very important function knob during the process of debugging the spring machine. After the spring product program is edited, it can enter the test mode for testing. The speed measurement control knob is used to control the speed of the system and observe the running status of the program. Turn the knob clockwise to increase the processing speed, otherwise decrease the speed until it stops. You can change the product program command to stop the processing when the stop, and then turn the knob again to test the processing effect. Repeat this process until you reach the processing purpose. Stop] or [Start] to switch between test mode and automatic mode to improve your tuning efficiency.

Handwheel:

Using the hand wheel can realize various numerical control spring machine operations such as manual rotation of each axis, editing of product data and hand wheel test processing. In [Auto] mode, you can select the corresponding axis in the main working interface, and turn the handwheel to adjust the position of each axis. When adjusting, you can enter the current data of each axis into the programming form with the keys Realize teaching input function of product data. At the same time, in the test mode, in addition to testing with the test knob, you can also use the handwheel to adjust the processing speed.

How to program a camless spring machine

After learning the above spring machine operation program, we have mastered how to program the camless spring machine, and hurry up to store it.