Union Spring Main: Spring machine, Wire rotary spring machine, Wire bending machine

Union Spring(Shenzhen) Technology Co., Ltd.

Home > News > Industry News

How to maintain CNC spring machine?

CNC spring machines require long-term use and are also very high-value equipment. They require optimized maintenance during use to be able to function stably, and the application costs that need to be spent are relatively low. So today I will teach you how to maintain the CNC spring machine?

Image keywords

Routine maintenance: Focusing on cleaning, tightening, adjusting, and lubricating, routine spring machine maintenance should be performed as required before leaving the vehicle, at work, and after receiving the vehicle. This task is independently completed by the operator of the CNC spring machine.

Regular maintenance: According to the maintenance requirements of various mechanical equipment, after reaching the specified working time or the specified mileage, the corresponding regular maintenance must be carried out, including the following three items:

First class maintenance

First-level maintenance is carried out on the basis of routine maintenance. The key work is to lubricate, tighten and check that the relevant parts have been cleaned and the three filters have been cleaned (air, engine oil, fuel filter). It is mainly guided by the head of the mechanical team and completed by the mechanical operators.

Secondary maintenance

Secondary maintenance mainly focuses on inspection and adjustment. Specifically, check the working conditions of the engine, clutch, transmission, etc. and make necessary adjustments to eliminate the faults found. To ensure that the CNC spring machine has good working performance. The second-level maintenance is performed by the mechanical operator to assist the warranty personnel.

Level 3 maintenance

Focuses on detection, adjustment, and elimination of hidden troubles. Diagnose and inspect the parts that affect the performance, and then complete the necessary replacement, adjustment and troubleshooting.



TAG:   CNC spring machine