Union Spring Main: Spring machine, Wire rotary spring machine, Wire bending machine

Union Spring(Shenzhen) Technology Co., Ltd.

Home > News > Company News

Camless spring machine maintenance

How to use the cam spring machine without maintenance skills? Generally speaking, as long as the normal operation of the spring machine is guaranteed and the failure rate is reduced, the service life of the spring machine can be extended. Let ’s take a look below.

Camless spring machine maintenance

的 The wear rate of the internal parts of the spring machine eliminates the long-term hidden dangers of the machine and extends the service life of the machine. We need to perform the following operations:

General maintenance:

We have to maintain the machine regularly, mainly focusing on cleaning, tightening, adjusting and lubricating. Before and after every job, we have to maintain the spring machine as required.

Usually this work is done by a spring mechanic.

When performing maintenance, sometimes we need to operate according to the requirements of various equipment, and we must also perform corresponding maintenance on the machine during the specified working hours.

Maintenance includes the following:

First level maintenance:

The first level maintenance refers to transferring the key work to the lubrication of the machine based on routine maintenance, and then checking and tightening whether the parts of important components have been cleaned.

Secondary maintenance:

The so-called secondary maintenance is mainly focused on inspection and adjustment.

Specially check the working conditions of the engine, clutch, transmission and other components of the spring machine. When a fault is found, the machine must be stopped for necessary adjustments and used after normal startup to ensure the performance of the computer spring machine.

Three levels of maintenance:

 For Level 3 maintenance, the focus is on fault detection, adjustment, and distribution.

In addition, the parts that affect the normal working performance of the machine must be diagnosed and inspected. In normal use of the machine, parts must be replaced or adjusted if necessary.

After reading the maintenance of camless spring machine in this article, I believe everyone has already understood. For more information, please pay attention to the official website of Yonglian Intelligent Equipment.